The heating up of a device can be quite alarming and should be checked out immediately. One of the reasons for the temperature rise might be a damaged cooling system. A solution for this is either repairing or replacement. today, I will chat about the replacement with you.

Whether you’ve been trying to set – up a new gaming PC or want to replace your old air cooler with an AIO, installing an AIO (All-In-One) liquid cooling can be a little complicated for the novices.

The fact is that AIO coolers are quite easy to handle and provide the added advantage of reduced temperatures and, in many PC cases, additional RGB lights to the system.

I am here to help you learn how to install a liquid cooling but before that, it’s good to have a little chit-chat about what a liquid AIO cooler is and how you should choose one that fits your PC.

What is a Liquid AIO Cooler?

We have been told that liquids and electronics can NEVER be good together but technology is advancing and is challenging most of the stuff we previously believed.

Closed all-in-one (AIO) water cooling technologies, often referred to as closed-loop coolers, are reliable, efficient, and very easy to install. In these cases, water is a computer’s closest buddy!

Just like any other cooler, a liquid (or water) cooler has only one purpose: to cool down a heated CPU. Water cooling is an ideal method of keeping a computer’s CPU cool. Modern all-in-one (AIO) liquid coolers can outperform air coolers in terms of performance and do not require a very complicated setup.

Most liquid cooling packages include all of the items you need to get started, for example, a radiator tube and the water block. When the water block is placed, it rests on the CPU and has a cold plate at the base of it.

It’s loaded with fluid to remove the warmth emitted by the CPU. After the water has taken all the energy it could, it is pushed via the pipe to a radiator, where it is cooled down before being transferred to the CPU via another pipe.

What is typically included with an AIO cooler?

You’ll find the following items in the box with an AIO liquid cooler.

1. Water Block/ Pump
2. Radiator
3. Tubing
4. Fan Screws
5. Backplate
6. Fans
7. Radiator Screws
8. Thumb Screws
9. Connect the cables
10. Support Screws

What Size AIO Cooler Should You Pick?

Many renowned companies, such as Thermaltake, Cooler Master, and NZXT, provide water cooling systems in a variety of dimensions and configurations. Water cooling systems are available in sizes ranging from 120 mm to 360 mm, with characteristics such as RGB lights and OLED panels.

Many variables must be considered while selecting the best water cooling equipment. The package must be suitable for your PC’s processor and fit inside the casing. Also, it ought to be competent enough to keep the gadget cool.

Usually, 240mm alternatives fit into most Regular ATX systems and give significantly greater ventilation than the compact 120mm ones, while larger 360mm coolers frequently offer the finest cooling, but also occupy more room and are typically pricey as compared to the smaller ones.

The ideal choice for me would be the 240mm coolers but everyone has got their own opinions and budget.

How long will an AIO Cooler last?

If you’re about to install an AIO water cooler for your CPU, you must want to know if it is worth the investment. An AIO cooler usually lasts for around five or eight years if used frequently. Typically, the tube is the most problematic part. Tubes can corrode with age, enabling valuable liquid to eventually escape, which will leave you with an ineffective cooler.

There is no easy way to maintain these CPU coolers unless you are experienced in working in electronics, especially coolers, or you’re a DIY pro. This is among a couple of disadvantages as compared to air coolers that require no service besides the occasional cleaning.

Relevant read: How To Build a Laptop at Home

However, a liquid cooler will rarely leak so you don’t have to worry about that part.

How to install a CPU cooler?

Finally, I am about to guide you on how to install the cooling unit into the CPU.

Fetch a screwdriver and get busy!

1. Switch the Computer off

Whatever you do to the PC (or any other electronic device), the first step will be to unplug it.

Relevant read: How Does RAM Affect Gaming

2. Prepare your PC

A little effort is needed in preparing your PC for the new liquid cooler. Before you can install a liquid cooler, some preparation is necessary. You’ll have to clear your way to every side of your Computer system (but mostly it is top), thus unscrew all panels as well as any parts that might get in the way while installation (if required).

Relevant read: How To Build A Gaming PC

3. Disconnect the CPU fan

Remove the CPU fan, and then gently release the securing screws that keep the heatsink in position. You may then remove the heatsink, revealing the CPU’s top.

4. Renew the thermal paste

There will most likely be some thermal paste remains on the upper portion of the CPU. This must be wiped up for your new AIO cooler pump to make a good thermal connection with the CPU. To clean, use a soft and lint-free cleaning cloth with rubbing alcohol. After removing the previous layer, apply a new one.

Although various AIO coolers include pre-applied thermal paste, in such cases this process may not be required.

Relevant read: Ways to Fix Computer Overheating Issues

5. Install the pump backplate

With a glossy CPU and unrestricted accessibility to your case, you may begin mounting the new cooler. The very first step is to place a backplate behind the CPU on the backside of the motherboard, which will be utilized to hold the pump assembly over the CPU.

6. Secure the brackets

Your cooler will come with a variety of brackets. These will be the sockets to keep the cooler in place. Grab the handbook and give it a read to ensure the brackets are in the correct position.

Four openings have to be noticeable commonly at the back side of the motherboard and around the central unit. Place the connecting hooks of the bracket into these openings, and then proceed to the front of the board. These screws will hold the bracket in place.

Don’t worry if the brackets seem wobbly regardless of the fact that the standoffs are securely linked; this is okay.

7. Install the radiator

A solid contemporary gaming PC frame must have radiator mounting slots. Attach the radiator with the included screws to those slots to fix the radiator into the system. Place the radiator in such a way that will allow the fluid to run easily. In most instances, bottom mounting a radiator with the pipes pointing upwards is not encouraged.

Relevant read: how to use Nvidia Freestyle?

8. Install the pump

The pump has an incorporated retaining bracket, which should fit perfectly over the motherboard standoffs you added previously. This bracket will require to be connected to the pump for installation purposes.

Position the pump on the Processor and make sure the standoffs are inserted into the slots in the retaining brackets. Examine the radiator tubes for coils or clogs before securing the cooler with the provided screws. The front and back brackets should now be tight after the installation.

Relevant read: How To Clean A Keyboard

9. Connect the cables

Plug the cables and other cords needed to get the AIO up and running. To find the necessary connections, see the instructions for your motherboard. A SATA power cord and a 3-pin adapter should be connected to the Fan connecter on the motherboard. Radiator fans are typically powered by 4-pin adapters. If the liquid cooling equipment has RGB lights, it will most probably connect to the motherboard’s RGB connectors. Verify that each of the connections is firmly attached and that the water block is in touch with the processing unit.

Relevant read: How To Update Your Graphics Driver?

10. Turn the PC on

Turn on the machine to verify that everything is in working order.

martin mcgaha

Martin is a tech blogger who started his blogging career in the toughest times of his life back in 2015. Over the course of 5 years, he experienced many ups and downs and mainly focused on providing the best content for his audience. Martin is also a 50% share holder at a corporate company named FifeMatrix. FifeMatrix is the owner of many tech blogs and Software Products.

View all posts

Affiliate Disclosure

Techprogeeks.com is a participant in the Amazon Services LLC Affiliate Program. It is an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon